READ ME FIRST!!!

NOTE: The ini Mach4 file is built on the OEM 
Mach4Mill standard profile, for the Modbus
Tutorial. If you have already set up your machine,
on the Stock Mach4 Mill profile, then, "Clone"
your Mach4 Mill Profile to something like: "Mach4Mill_1" 
or the like. Then drop the Mach4Mill ini that is in the Zip,
into your "Profiles" folder of the "Stock" Mach4Mill folder, 
after you have opened and closed your "Clone" so that your previous
stock settings are now all cloned over to your new profile.
This Mach ini will have all the modbus and config already done for you.
once it opens you will need to load the screen set called: 
"wxMachATC.set" you will see an ATC page tab where all the action 
takes place.

I would HIGHLY recommend you read the "How to Set Up Modbus in Mach4.pdf"
first to make sure you understand the project and what you need to make
it work for you.

Scott "Poppa Bear" Shafer